 |
电话：0317-3219158 3815363 |
|
Seals series 您现在的位置：首页 - Seals series
Stainless steel metal winding gasket 
Metal winding gasket piece by V or W form metal and nonmetallic belt without overlapping, continuous winding and become, in the beginning and end of the spot welding way belongs to the belt.
Expanded graphite with high temperature resistance, corrosion resistance, as well as good flexibility and resilience, the winding gasket series, its temperature is relatively high. Metal winding gasket is most suitable for use in alternating temperature Settings. Metal winding gasket is piping, heat exchanger, tower tank such as flange connection of the static sealing element, metal winding pads are widely used in petroleum, chemical, electric power, ship, such as steel door. Especially in high temperature and high pressure steam, alternating hot and cold temperature difference when using the most suitable. Have good resilience, compression is suitable for the temperature and pressure alternating intense sealing parts, pipe, valve, pump, tower, heat exchanger, man holes, hand holes and other flange connect static sealing element of it. Widely used in petrochemical, machinery, electric power, metallurgy, shipbuilding, medical and aerospace sectors. We can according to ANSI, APL, DLN, JPL, BS standards such as production, or indicated by the user specific requirements. Using pressure is less than or equal to 25 mpa. Such as gaskets used in heat exchanger, in general we recommend stainless steel inner ring diameter of 3.2 M, the narrow strip with steel belt, ribbon paste form points or coated.
Product features:
Oxide gas: 550 ℃
The oxidizing gas: 800 ℃
The highest working pressure: KGF/cm * 420 cm
Water medium class 550
550 oil medium
Gas medium class 550
|
